XYZ 1000 LR

XYZ 1000 LR

Spindle: 15kW (20hp) 8,000 rpm
Table Size: 1,060 x 500mm
Travels: 1,000 x 5000 x 500mm
Machine Weight: 4,600kg

Conforming to ISO 10791

Positional accuracy: +/- 5 microns

Repeatability: = +/- 2 microns

Circularity over 300mm: 10 microns

Geometric accuracy over 300mm: 10 microns

Standard Equipment

  • Siemens 828D Control.
  • Optimised Digital Servo Drives.
  • Rigid Tapping.
  • Flood Coolant.
  • Worklight.
  • 20 Station Carousel ATC.
  • Easy Clean Swarf Tray.
  • Steel Concertina Guards on all axes.
  • Powder Coated Guarding.
  • Pull Studs.
  • USB Port.
  • Compact Flash Card Slot.

Optional Equipment

  • 24 Station Arm Type ATC.
  • 4th Axis Rotary Table.
  • Swarf Conveyor and Bin.
  • Renishaw / Heidenhain Toolsetting and Probing.
  • 12,000 rpm Spindle.
  • Through Spindle Coolant.
  • Remote Electronic Handwheel.
  • Side Vision Panels.
  • Offline Programming.
  • ShopMill Advanced Software.
  • Contour Handwheel (wind the handwheel to run through the program).
  • Factory Networking.
  • Advanced Swarf Management System.
  • DXF Reader.
  • Coolant Washdown Gun.

Call 01823 674200 for more details.

Watch The Videos Below

An overview of the XYZ 1000 LR

Alken Engineering chose the XYZ LR range

XYZ VMC Range

Linear Rail Ball Bearing Slides

The use of linear rails on machining centres has been common for many years, as they allow users to take advantage of improvements in digital motion control and modern cutting tool performance, therefore maximising their competitiveness. Now, with the latest design advances in linear rail technology, XYZ Machine Tools feel that they meet its own stringent performance standards, while still providing a cost advantage and the arrival of the three machine XYZ LR range is the result.

The XYZ 1000 LR provides large capacity at affordable prices

The XYZ Linear rail series of vertical machining centres showcases the XYZ 1000 LR which has an impressive specification, including 1000 mm of travel in the X-axis and 500 mm in both the Y and Z axes. It shares the same 13 kW, 8000 rpm, BT 40 spindle with the other machines in the range as well as the standard 20 position tool carousel. It also has the option of a 24 station arm-type tool changer. The recent development in linear rail technology now means that XYZ can deliver a machine of this size to a very competitive price/performance ratio. Demonstrations of XYZ’s linear rail machines are available at any of the XYZ showrooms.

Specification

XYZ 500 LRXYZ 750 LRXYZ 1000 LRXYZ 1600 LR
X Axis Table Travel500mm750mm1,000mm1,600mm
Y Axis Table Travel400mm440mm500mm650mm
Z Vertical Travel440mm500mm500mm630mm
Table Size580 x 400mm830 x 410mm1,060 x 500mm1,660 x 660mm
Spindle Centre to Column415mm500mm532mm750mm
Spindle to Table100 - 550mm100 - 600mm110 - 610mm105 - 740mm
Column Front to Table Centre215 - 615mm305 - 745mm282mm - 782mm370 - 1,030mm
Rapid Feedrate20M/min20M/min20M/min20M/min
Cutting Feedrates1 - 20,000 MM/min1 - 20,000 MM/min1 - 20,000 MM/min1 - 20,000 MM/min
Max Table Load250kg500kg800kg1,000kg
T Slot Size16mm16mm16mm18mm
T Slot Number & Pitch3 off @125mm Pitch3 off @100mm Pitch4 off @ 125mm Pitch5 off @ 100mm Pitch
Spindle Speeds5 - 8,000 rpm (12,000 Optional)5 - 8,000 rpm (12,000 Optional)5 - 8,000 rpm (12,000 Optional)5 - 10,000 rpm (12,000 Optional)
Spindle Motor15kW (20hp)15kW (20hp)15kW (20hp)15kW (20hp)
Spindle TaperBT40 (SK & Cat Optional)BT40 (SK & Cat Optional)BT40 (SK & Cat Optional)BT40 (SK & Cat Optional)
Toolchanger12 Station Carousel20 Station Carousel (24 Arm type Optional)20 Station Carousel (24 Arm type Optional)24 Station Arm Type ATC
Toolchange Time8 secs8 secs (Carousel) / 2.5 secs (Arm)8 secs (Carousel) / 2.5 secs (Arm)2.5 secs
Max Tool Diameter100mm100mm (Carousel) / 78mm (Arm) 100mm (Carousel) / 78mm (Arm)78mm
Max Tool Weight7Kg7Kg7Kg7Kg
Max Tool Length250mm250mm250mm250mm
Coolant Tank Capacity105L125L160L300L
Ballscrew (Grade C3)28mm Dia P832mm Dia P832mm Dia P840mm Dia P8
AC Digital Servo Motors Max TorqueX = 8 Nm / Y = 8 Nm / Z = 12 Nm 3,000 rpmX = 8 Nm / Y = 8 Nm / Z = 12 Nm 3,000 rpmX = 8 Nm / Y = 8 Nm / Z = 12 Nm 3,000 rpmX = 12 Nm / Y = 12 Nm / Z = 16 Nm 3,000 rpm
Machine Weight2,400kg3,500kg4,600kg6,700kg
Footprint1,890 x 1,982 x 2,700mm2,362 x 2,170 x 2,655mm2,865 x 2,390 x 2,680mm4,305 x 2,735 x 2,900mm
Pull Stud TypeMAS403 Type1MAS403 Type1MAS403 Type1MAS403 Type1
Servo MotorSiemens Digital ServoSiemens Digital ServoSiemens Digital ServoSiemens Digital Servo
Coolant Pump0.2kW0.2kW0.63kW0.63kW
Slideway TypeLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball Bearing
Working Height (without riser blocks)2,200mm2,645mm2,700mm3,100mm
Power Requirements37A39A39A45A
Air Requirements6 bar (220 L/min)6 bar (220 L/min)6 bar (220 L/min)6 bar (220 L/min)
XYZ 1000 LR
X Axis Table Travel1,000mm
Y Axis Table Travel500mm
Z Vertical Travel500mm
Table Size1,060 x 500mm
Spindle Centre to Column532mm
Spindle to Table110 - 610mm
Column Front to Table Centre282mm - 782mm
Rapid Feedrate20M/min
Cutting Feedrates1 - 20,000 MM/min
Max Table Load800kg
T Slot Size16mm
T Slot Number & Pitch4 off @ 125mm Pitch
Spindle Speeds5 - 8,000 rpm (12,000 Optional)
Spindle Motor15kW (20hp)
Spindle TaperBT40 (SK & Cat Optional)
Toolchanger20 Station Carousel (24 Arm type Optional)
Toolchange Time8 secs (Carousel) / 2.5 secs (Arm)
Max Tool Diameter100mm (Carousel) / 78mm (Arm)
Max Tool Weight7Kg
Max Tool Length250mm
Coolant Tank Capacity160L
Ballscrew (Grade C3)32mm Dia P8
AC Digital Servo Motors Max TorqueX = 8 Nm / Y = 8 Nm / Z = 12 Nm 3,000 rpm
Machine Weight4,600kg
Footprint2,865 x 2,390 x 2,680mm
Pull Stud TypeMAS403 Type1
Servo MotorSiemens Digital Servo
Coolant Pump0.63kW
Slideway TypeLinear Rail Ball Bearing
Working Height (without riser blocks)2,700mm
Power Requirements39A
Air Requirements6 bar (220 L/min)