XYZ 1000 LR
XYZ 1000 LR
Spindle: 15kW (20hp) 8,000 rpm
Table Size: 1,060 x 500mm
Travels: 1,000 x 5000 x 500mm
Machine Weight: 4,600kg
Conforming to ISO 10791
Positional accuracy: +/- 5 microns
Repeatability: = +/- 2 microns
Circularity over 300mm: 10 microns
Geometric accuracy over 300mm: 10 microns
Standard Equipment
- Siemens 828D Control.
- Optimised Digital Servo Drives.
- Rigid Tapping.
- Flood Coolant.
- Worklight.
- 20 Station Carousel ATC.
- Easy Clean Swarf Tray.
- Steel Concertina Guards on all axes.
- Powder Coated Guarding.
- Pull Studs.
- USB Port.
- Compact Flash Card Slot.
Optional Equipment
- 24 Station Arm Type ATC.
- 4th Axis Rotary Table.
- Swarf Conveyor and Bin.
- Renishaw / Heidenhain Toolsetting and Probing.
- 12,000 rpm Spindle.
- Through Spindle Coolant.
- Remote Electronic Handwheel.
- Side Vision Panels.
- Offline Programming.
- ShopMill Advanced Software.
- Contour Handwheel (wind the handwheel to run through the program).
- Factory Networking.
- Advanced Swarf Management System.
- DXF Reader.
- Coolant Washdown Gun.
Call 01823 674200 for more details.
Watch The Videos Below
An overview of the XYZ 1000 LR
Alken Engineering chose the XYZ LR range
XYZ VMC Range
Linear Rail Ball Bearing Slides
The use of linear rails on machining centres has been common for many years, as they allow users to take advantage of improvements in digital motion control and modern cutting tool performance, therefore maximising their competitiveness. Now, with the latest design advances in linear rail technology, XYZ Machine Tools feel that they meet its own stringent performance standards, while still providing a cost advantage and the arrival of the three machine XYZ LR range is the result.
The XYZ 1000 LR provides large capacity at affordable prices
The XYZ Linear rail series of vertical machining centres showcases the XYZ 1000 LR which has an impressive specification, including 1000 mm of travel in the X-axis and 500 mm in both the Y and Z axes. It shares the same 13 kW, 8000 rpm, BT 40 spindle with the other machines in the range as well as the standard 20 position tool carousel. It also has the option of a 24 station arm-type tool changer. The recent development in linear rail technology now means that XYZ can deliver a machine of this size to a very competitive price/performance ratio. Demonstrations of XYZ’s linear rail machines are available at any of the XYZ showrooms.
Specification
| XYZ 500 LR | XYZ 750 LR | XYZ 1000 LR | XYZ 1600 LR | |
|---|---|---|---|---|
| X Axis Table Travel | 500mm | 750mm | 1,000mm | 1,600mm |
| Y Axis Table Travel | 400mm | 440mm | 500mm | 650mm |
| Z Vertical Travel | 440mm | 500mm | 500mm | 630mm |
| Table Size | 580 x 400mm | 830 x 410mm | 1,060 x 500mm | 1,660 x 660mm |
| Spindle Centre to Column | 415mm | 500mm | 532mm | 750mm |
| Spindle to Table | 100 - 550mm | 100 - 600mm | 110 - 610mm | 105 - 740mm |
| Column Front to Table Centre | 215 - 615mm | 305 - 745mm | 282mm - 782mm | 370 - 1,030mm |
| Rapid Feedrate | 20M/min | 20M/min | 20M/min | 20M/min |
| Cutting Feedrates | 1 - 20,000 MM/min | 1 - 20,000 MM/min | 1 - 20,000 MM/min | 1 - 20,000 MM/min |
| Max Table Load | 250kg | 500kg | 800kg | 1,000kg |
| T Slot Size | 16mm | 16mm | 16mm | 18mm |
| T Slot Number & Pitch | 3 off @125mm Pitch | 3 off @100mm Pitch | 4 off @ 125mm Pitch | 5 off @ 100mm Pitch |
| Spindle Speeds | 5 - 8,000 rpm (12,000 Optional) | 5 - 8,000 rpm (12,000 Optional) | 5 - 8,000 rpm (12,000 Optional) | 5 - 10,000 rpm (12,000 Optional) |
| Spindle Motor | 15kW (20hp) | 15kW (20hp) | 15kW (20hp) | 15kW (20hp) |
| Spindle Taper | BT40 (SK & Cat Optional) | BT40 (SK & Cat Optional) | BT40 (SK & Cat Optional) | BT40 (SK & Cat Optional) |
| Toolchanger | 12 Station Carousel | 20 Station Carousel (24 Arm type Optional) | 20 Station Carousel (24 Arm type Optional) | 24 Station Arm Type ATC |
| Toolchange Time | 8 secs | 8 secs (Carousel) / 2.5 secs (Arm) | 8 secs (Carousel) / 2.5 secs (Arm) | 2.5 secs |
| Max Tool Diameter | 100mm | 100mm (Carousel) / 78mm (Arm) | 100mm (Carousel) / 78mm (Arm) | 78mm |
| Max Tool Weight | 7Kg | 7Kg | 7Kg | 7Kg |
| Max Tool Length | 250mm | 250mm | 250mm | 250mm |
| Coolant Tank Capacity | 105L | 125L | 160L | 300L |
| Ballscrew (Grade C3) | 28mm Dia P8 | 32mm Dia P8 | 32mm Dia P8 | 40mm Dia P8 |
| AC Digital Servo Motors Max Torque | X = 8 Nm / Y = 8 Nm / Z = 12 Nm 3,000 rpm | X = 8 Nm / Y = 8 Nm / Z = 12 Nm 3,000 rpm | X = 8 Nm / Y = 8 Nm / Z = 12 Nm 3,000 rpm | X = 12 Nm / Y = 12 Nm / Z = 16 Nm 3,000 rpm |
| Machine Weight | 2,400kg | 3,500kg | 4,600kg | 6,700kg |
| Footprint | 1,890 x 1,982 x 2,700mm | 2,362 x 2,170 x 2,655mm | 2,865 x 2,390 x 2,680mm | 4,305 x 2,735 x 2,900mm |
| Pull Stud Type | MAS403 Type1 | MAS403 Type1 | MAS403 Type1 | MAS403 Type1 |
| Servo Motor | Siemens Digital Servo | Siemens Digital Servo | Siemens Digital Servo | Siemens Digital Servo |
| Coolant Pump | 0.2kW | 0.2kW | 0.63kW | 0.63kW |
| Slideway Type | Linear Rail Ball Bearing | Linear Rail Ball Bearing | Linear Rail Ball Bearing | Linear Rail Ball Bearing |
| Working Height (without riser blocks) | 2,200mm | 2,645mm | 2,700mm | 3,100mm |
| Power Requirements | 37A | 39A | 39A | 45A |
| Air Requirements | 6 bar (220 L/min) | 6 bar (220 L/min) | 6 bar (220 L/min) | 6 bar (220 L/min) |
| XYZ 1000 LR | |
|---|---|
| X Axis Table Travel | 1,000mm |
| Y Axis Table Travel | 500mm |
| Z Vertical Travel | 500mm |
| Table Size | 1,060 x 500mm |
| Spindle Centre to Column | 532mm |
| Spindle to Table | 110 - 610mm |
| Column Front to Table Centre | 282mm - 782mm |
| Rapid Feedrate | 20M/min |
| Cutting Feedrates | 1 - 20,000 MM/min |
| Max Table Load | 800kg |
| T Slot Size | 16mm |
| T Slot Number & Pitch | 4 off @ 125mm Pitch |
| Spindle Speeds | 5 - 8,000 rpm (12,000 Optional) |
| Spindle Motor | 15kW (20hp) |
| Spindle Taper | BT40 (SK & Cat Optional) |
| Toolchanger | 20 Station Carousel (24 Arm type Optional) |
| Toolchange Time | 8 secs (Carousel) / 2.5 secs (Arm) |
| Max Tool Diameter | 100mm (Carousel) / 78mm (Arm) |
| Max Tool Weight | 7Kg |
| Max Tool Length | 250mm |
| Coolant Tank Capacity | 160L |
| Ballscrew (Grade C3) | 32mm Dia P8 |
| AC Digital Servo Motors Max Torque | X = 8 Nm / Y = 8 Nm / Z = 12 Nm 3,000 rpm |
| Machine Weight | 4,600kg |
| Footprint | 2,865 x 2,390 x 2,680mm |
| Pull Stud Type | MAS403 Type1 |
| Servo Motor | Siemens Digital Servo |
| Coolant Pump | 0.63kW |
| Slideway Type | Linear Rail Ball Bearing |
| Working Height (without riser blocks) | 2,700mm |
| Power Requirements | 39A |
| Air Requirements | 6 bar (220 L/min) |