XYZ XL 780

Also Available with Live Tooling, CLICK HERE for more information
XYZ XL 780
SPINDLE 43 HP / 32 kW
3 METRE GAP BED LATHE
SWING OVER BED 780mm
SPINDLE BORE 160mm
DISTANCE BETWEEN
CENTRES 3000mm
MAX 1300 RPM
Standard Equipment
- Siemens 828D ShopTurn Control.
3 Jaw 500mm diameter steel chuck (1300 RPM Max). - 4 Station Auto Indexing Toolpost.
- Air assist ‘floating’ tailstock with towing hitch.
- Joystick control for rapid movement.
- Coolant.
- Worklight.
- Automatic lubrication.
- Electromagnetic spindle brake.
- Chuck guard (interlocked).
- Swarf guard (interlocked).
- Dead centres, sleeves.
- Networking.
- Compact Flash
- Card Slot.
- USB Port.
Optional Equipment
- Siemens Contour Handwheel (wind the handwheel to run through the program)
- Offline Programming.
- Face Plates, Steadies and Chucks.
- Factory Networking.
- 8 Station Turret.
- Conveyor and Bin.
- Advanced Swarf Management System.
Call 01823 674200 for more details.
XYZ XL 780 reviewed
XYZ XL and Oil Country Lathes
The XYZ XL and Oil Country Lathes are heavy-duty machines built to handle the toughest of work for either chucking or between centre applications using the massive tailstock assembly. The solid ribbed cast construction with wide vee and flat bed ways offer excellent stability and rigidity. The powerful spindles sit in a headstock built using the highest quality gears and bearings. In combination, these features create one of the most capable and reliable ranges of large capacity lathes available in the UK.
Specification
XYZ XL 780 | XYZ XL 1100 | XYZ XL 1200 | XYZ XL 1500 | XYZ OIL COUNTRY (310mm Bore) | XYZ OIL COUNTRY (420mm Bore) | |
---|---|---|---|---|---|---|
Spindle | 40HP Variable Spindle Speed with Yaskawa Inverter Drive | 50HP | 50HP | 50HP | 50HP | 50HP |
Spindle Speeds | 20 - 1,300rpm | 20-660rpm | 20-600rpm | 20-600rpm | 20-600rpm | 20-600rpm |
Spindle Bore | 160mm | 160mm | 160mm | 160mm | 160mm | 160mm |
Spindle Nose | A2-11 | A2-11 | A2-11 | A2-11 | A2-11 | A2-11 |
Speed Ranges | 2 Ranges (20-415 & 40-1,300rpm) | 3 Ranges (20-110 & 110-320 & 320-660rpm) | 2 Ranges (20-300 & 200-600rpm) | 2 Ranges (20-300 & 200-600rpm) | 2 Ranges (20-300 & 200-600rpm) | 2 Ranges (20-300 & 200-600rpm) |
Spindle Taper | MT7 in bush | MT15 | MT15 | MT15 | MT15 | MT15 |
Swing Over Bed | 780mm | 1100mm | 1200mm | 1500mm | 1500mm | 1500mm |
Swing in Gap | 1090mm | N/A | N/A | N/A | N/A | N/A |
Gap in front of Faceplate | 157mm | N/A | N/A | N/A | N/A | N/A |
Swing over Cross Slide | 535mm | 750mm | 830mm | 1130mm | 1130mm | 1130mm |
Cross Slide Travel | 430mm | 550mm | 750mm | 750mm | 750mm | 750mm |
Distance between Centres | 3000mm | 1000 - 6000mm | 1,000 - 10,000mm | 1,000 - 10,000mm | 1,000 - 10,000mm | 1,000 - 10,000mm |
Maximum Cutting Length | 2900mm | 300mm less than centre distance | 300mm less than centre distance | 300mm less than centre distance | 300mm less than centre distance | 300mm less than centre distance |
Tailstock Travel | 200mm | 300mm | 350mm | 350mm | 350mm | 350mm |
Tailstock Taper | MT6 | MT6 | MT6 | MT6 | MT6 | MT6 |
Tailstock Diameter | 105mm | 115mm | 125mm | 125mm | 125mm | 125mm |
Bed Width | 500mm | 533mm | 692mm | 692mm | 692mm | 692mm |
DC Servo Motors | AC Digital Servo Motors | AC Digital Servo Motors | AC Digital Servo Motors | AC Digital Servo Motors | AC Digital Servo Motors | AC Digital Servo Motors |
Floorplan (L x D x H) | 5400 x 2300 x 2100 mm | 4070 x 2300 x 2100 mm | 4180 x 2500 x 2300 mm | 4280 x 2500 x 2400 mm | 4280 x 2500 x 2400 mm | 4280 x 2500 x 2400 mm |
Machine Weight | 8,600Kg | 8,000 (add 1100kg per extra metre) | 9,600 (add 1400kg per extra metre) | 10,000 (add 1400kg per extra metre) | 10,000 (add 1400kg per extra metre) | 10,000 (add 1400kg per extra metre) |
Power Requirements | 80A/ Phase | 120A/ Phase | 120A/ Phase | 80A/ Phase | 80A/ Phase | 80A/ Phase |
Air Requirements | 6 bar | 6 bar | 6 bar | 6 bar | 6 bar | 6 bar |
XYZ XL 780 | |
---|---|
Spindle | 40HP Variable Spindle Speed with Yaskawa Inverter Drive |
Spindle Speeds | 20 - 1,300rpm |
Spindle Bore | 160mm |
Spindle Nose | A2-11 |
Speed Ranges | 2 Ranges (20-415 & 40-1,300rpm) |
Spindle Taper | MT7 in bush |
Swing Over Bed | 780mm |
Swing in Gap | 1090mm |
Gap in front of Faceplate | 157mm |
Swing over Cross Slide | 535mm |
Cross Slide Travel | 430mm |
Distance between Centres | 3000mm |
Maximum Cutting Length | 2900mm |
Tailstock Travel | 200mm |
Tailstock Taper | MT6 |
Tailstock Diameter | 105mm |
Bed Width | 500mm |
DC Servo Motors | AC Digital Servo Motors |
Floorplan (L x D x H) | 5400 x 2300 x 2100 mm |
Machine Weight | 8,600Kg |
Power Requirements | 80A/ Phase |
Air Requirements | 6 bar |