XYZ 750 LR

XYZ 750 LR

SPINDLE 18 HP / 13 kW
830 x 410 mm TABLE
750 x 440 x 500 mm TRAVEL

Conforming to ISO 10791

Positional accuracy: +/- 5 microns

Repeatability: = +/- 2 microns

Circularity over 300mm: 10 microns

Geometric accuracy over 300mm: 10 microns

Standard Equipment

  • Siemens 828D Control.
  • Optimised Digital Servos.
  • Rigid Tapping.
  • Flood Coolant.
  • Worklight.
  • 20 Station Carousel.
  • Easy Clean Swarf Tray.
  • Steel Concertina Guards on all axes.
  • Powder Coated Guarding.
  • Pull Studs.
  • USB Port.
  • Compact Flash Card Slot.

Optional Equipment

  • 4th Axis Rotary Table.
  • Swarf Conveyor and Bin.
  • Renishaw/Heidenhain Toolsetting and Probing.
  • 12,000RPM Spindle.
  • Through Spindle Coolant.
  • Remote Electronic Handwheel.
  • Side Vision Panels.
  • Offline Programming.
  • 24 Station Arm Type ATC.
  • ShopMill Advanced Software.
  • Contour Handwheel (wind the handwheel to run through the program).
  • Factory Networking.
  • Advanced Swarf Management System.

Call 01823 674200 for more details.

Watch The Videos Below

XYZ 750 LR an Overview with Russell

Alken Engineering chose the XYZ LR range


Linear Rail Ball Bearing Slides

The use of linear rails on machining centres has been common for many years, as they allow users to take advantage of improvements in digital motion control and modern cutting tool performance, therefore maximising their competitiveness. Now, with the latest design advances in linear rail technology, XYZ Machine Tools feel that they meet its own stringent performance standards, while still providing a cost advantage and the arrival of the three machine XYZ LR range is the result.

XYZ 750 LR hits the spot for cost-effective machining

Sitting in the middle of the new XYZ LR range of linear rail machines, the XYZ 750 LR’s capacity will make it the most popular choice for those looking to step up to CNC vertical machining centre operation at a very competitive price. With axis travels of 750 x 440 x 500 mm the XYZ 750 LR has the capacity to handle the majority of work passing through a typical machine shop. Add to that the 8000 rpm, BT 40 spindle, 20 position toolchanger and a maximum table load of 500 kg it is a more than capable machine. Demonstrations of the XYZ 750 LR are available at any of the XYZ showrooms.


XYZ 500 LRXYZ 750 LRXYZ 1000 LRXYZ 1600 LR
Spindle MotorSiemens 18HPSiemens 18HPSiemens 18HPSiemens 20HP
Spindle Speeds5 - 8000 rpm (12,000 Optional)5 - 8000 RPM (12,000 Optional)5 - 8000 RPM (12,000 Optional)5 - 10000 RPM (12,000 Optional)
Spindle TaperBT40 (SK & Cat Optional)BT40 (SK & Cat Optional)BT40 (SK & Cat Optional)BT40 (SK & Cat Optional)
Pull Stud TypeMAS403 Type1MAS403 Type1MAS403 Type1MAS403 Type1
Spindle Centre to Column415mm500mm532mm750mm
Spindle to Table100mm - 550mm100mm - 600mm110mm - 610mm105 - 740 mm
Column Front to Table Centre215mm - 615mm305mm - 745mm282mm - 782mm370 - 1,030 mm
Table Size580mm X 400mm830mm X 410mm1060mm X 500mm1,660 x 660 mm
Max Table Load250Kg500Kg800Kg1,000Kg
T Slots3 off @125mm Pitch3 off @100mm Pitch4 off @ 125mm Pitch5 off @ 100mm Pitch
T Slot Size16mm16mm16mm18mm
X Axis Table Travel510mm750mm1000mm1,600mm
Y Axis Table Travel400mm440mm500mm660mm
Z Vertical Travel450mm500mm500mm635mm
BallscrewGrade C3 - 28mm Dia P8Grade C3 - 32mm Dia P8Grade C3 - 32mm Dia P8Grade C3 - 40mm Dia P12
AC Digital Servo Motors Max Torque8Nm (X & Y) 12Nm (Z) 3000rpm8Nm (X & Y) 12Nm (Z) 3000rpm8Nm (X & Y) 12Nm (Z) 3000rpm12Nm (X & Y) 16Nm (Z) 3000rpm
Servo MotorSiemens Digital ServoSiemens Digital ServoSiemens Digital ServoSiemens Digital Servo
Rapid Feedrate20M/min20M/min20M/min20M/min
Cutting Feedrates1-20000mm/min1-20000mm/min1-20000mm/min1-20000mm/min
Toolchanger12 Station Carousel20 Station Carousel (24 Arm type Optional)20 Station Carousel (24 Arm type Optional)24 Station Arm Type ATC
Toolchange Time8 secs8 sec Carousel (2.5 sec Arm type)8 sec Carousel (2.5 sec Arm type)2.5 secs
Max Tool Diameter100mm100mm Carousel (78mm Arm type) 100mm Carousel (78mm Arm type) 100mm Carousel (78mm Arm type)
Max Tool Weight6Kg7Kg7Kg8Kg
Max Tool Length250mm250mm250mm250mm
Coolant Pump0.38Kw2 off 1.8A2 off 1.8A2 off 1.8A
Coolant Tank Capacity105L125L160L300L
Slideway TypeLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball Bearing
Footprint (without travels)1660mm X 1860mm X 2300mm2100mm X 2150mm X 2450mm2530mm X 2200mm X 2500mm4,000 x 2,650 x 2,900 mm
Working Height (without riser blocks)2200mm2645mm2700mm3,100mm
Machine Weight2,400Kg3,500Kg4,600Kg6,500Kg
Power Requirements37A39A39A45A
Air Requirements6 bar6 bar (220 L/min)6 bar (220 L/min)6 bar (220 L/min)
XYZ 750 LR
Spindle MotorSiemens 18HP
Spindle Speeds5 - 8000 RPM (12,000 Optional)
Spindle TaperBT40 (SK & Cat Optional)
Pull Stud TypeMAS403 Type1
Spindle Centre to Column500mm
Spindle to Table100mm - 600mm
Column Front to Table Centre305mm - 745mm
Table Size830mm X 410mm
Max Table Load500Kg
T Slots3 off @100mm Pitch
T Slot Size16mm
X Axis Table Travel750mm
Y Axis Table Travel440mm
Z Vertical Travel500mm
BallscrewGrade C3 - 32mm Dia P8
AC Digital Servo Motors Max Torque8Nm (X & Y) 12Nm (Z) 3000rpm
Servo MotorSiemens Digital Servo
Rapid Feedrate20M/min
Cutting Feedrates1-20000mm/min
Toolchanger20 Station Carousel (24 Arm type Optional)
Toolchange Time8 sec Carousel (2.5 sec Arm type)
Max Tool Diameter100mm Carousel (78mm Arm type)
Max Tool Weight7Kg
Max Tool Length250mm
Coolant Pump2 off 1.8A
Coolant Tank Capacity125L
Slideway TypeLinear Rail Ball Bearing
Footprint (without travels)2100mm X 2150mm X 2450mm
Working Height (without riser blocks)2645mm
Machine Weight3,500Kg
Power Requirements39A
Air Requirements6 bar (220 L/min)