XYZ KMX 2000
XYZ KMX 2000
3HP VARIABLE SPEED HEAD
1270 x 254mm TABLE
762 x 380mm TRAVEL
- Vari Speed 2 Range Head.
- Chrome Slides or Box Ways.
- 3 Axis DRO.
- 2 Axis CNC.
- Verify Solid Model Graphics.
- Precision Ground Ballscrews.
- Work Light.
- Auto Lubrication.
- Fibreglass Swarf Tray.
- Interlocked Guarding.
- Riser Blocks.
- Air Drawbars.
- 4th Axis DRO.
- Offline Software.
- Tooling, Vices etc.
- Parasolid and
- DXF Convertors.
- Millstar (Quill DRO).
See the Videos Below
KMX Range of Turret Milling Machines
Introducing the RMX, RLX & KMX controls
THE BEST LOW VOLUME CONTROL MADE EVEN BETTER
|XYZ KMX 1500||XYZ KMX 2000||XYZ KMX SLV|
|Spindle||3HP Variable Spindle Speed||3HP Variable Spindle Speed||5HP Variable Spindle Speed|
|Spindle Speeds||60 - 4200 RPM||75 - 4200 RPM||70 - 3600 RPM|
|Speed Ranges||2 Ranges||2 Ranges||2 Ranges|
|Spindle Taper||R8 (ISO 30 Optional)||R8 (ISO 30 Optional)||ISO 40|
|Table Size||1069mm X 228mm||1270mm X 254mm||1473mm X 305mm|
|T Slots||3 off||3 off||3 off|
|T Slot Size||15.9mm||15.9mm||15.9mm|
|X Axis Table Travel||610mm||753mm||1000mm|
|Y Axis Table Travel||305mm||380mm||410mm|
|Knee Vertical Travel||362mm||406mm||413mm - Powered|
|Swivel on Turret||360°||360°||360°|
|Head Tilt Front to Back||+45° / -45°||+45° / -45°||+45° / -45°|
|Head Tilt Left to right||+90° / -90°||+90° / -90°||+90° / -90°|
|Max Throat Depth||686mm||686mm||700mm|
|Max Table Load||350Kg||350Kg||580Kg|
|No of Quill Feeds||3||3||3|
|Slideway Type||Hardened Way||Hardened Chrome||Hardened & Ground Boxway|
|Footprint (without travels)||1600mm X 1450mm||1880mm X 1672mm X 2212mm||2173mm X 1818mm X 2302mm|
|Floorplan (includes table travels)||2167mm X 1670mm||2621mm X 1902mm X 2222mm||3163mm X 2028mm X 2302mm|
|Working Height (without riser blocks)||2220mm||2175mm||2330mm|
|Air Requirements||6 bar (220 L/min)||6 bar (220 L/min)||6 bar (220 L/min)|
|XYZ KMX 2000|
|Spindle||3HP Variable Spindle Speed|
|Spindle Speeds||75 - 4200 RPM|
|Speed Ranges||2 Ranges|
|Spindle Taper||R8 (ISO 30 Optional)|
|Table Size||1270mm X 254mm|
|T Slots||3 off|
|T Slot Size||15.9mm|
|X Axis Table Travel||753mm|
|Y Axis Table Travel||380mm|
|Knee Vertical Travel||406mm|
|Swivel on Turret||360°|
|Head Tilt Front to Back||+45° / -45°|
|Head Tilt Left to right||+90° / -90°|
|Max Throat Depth||686mm|
|Max Table Load||350Kg|
|No of Quill Feeds||3|
|Slideway Type||Hardened Chrome|
|Footprint (without travels)||1880mm X 1672mm X 2212mm|
|Floorplan (includes table travels)||2621mm X 1902mm X 2222mm|
|Working Height (without riser blocks)||2175mm|
|Air Requirements||6 bar (220 L/min)|
Motor / Head
All Turret Mill spindles are driven by AC motors transmitting power through a two speed gear box and variable speed cone pulleys. Precision quill bearings are dynamically balanced and built in a dust free, temperature controlled environment, to ensure smooth and accurate cutting performance.
KMX Turret Mills have the TRAKing facility as an option which allows the operator to wind the handwheel and the machine moves through the program at that speed. The faster you wind the faster it machines. Stop or reverse the hand wheel and the machine does the same.
Servo’s & Ballscrews
High performance servo motors are built into the casting to protect them from the harsh machine shop environment. These servo’s provide smooth consistent power to the precision ground ballscrews to give a perfect milled finish.
Mechanical handwheels allow the machinist to ‘feel’ the cutting process when manual machining is preferred, and will automatically disengage when the machine is running under CNC control.
Built of solid Meehanite ribbed cast iron with induction hardened and ground slides. Turcite-B coated ways and auto lubrication to all slides and precision ground ballscrews aid accuracy and longevity.
The latest generation of ProtoTRAK KMX control provides maximum operator productivity particularly on one-off components or small batches. Even an operator with no previous CNC experience will be producing simple or complex parts within hours.