XYZ 1600 LR

XYZ 1600 LR

Spindle: 15kW (20hp) 10,000 rpm
Table Size: 1,660 x 660mm
Travels: 1,600 x 650 x 630mm
Machine Weight: 6,700kg

Conforming to ISO 10791

Positional accuracy: +/- 5 microns

Repeatability: = +/- 2 microns

Circularity over 300mm: 10 microns

Geometric accuracy over 300mm: 10 microns

Standard Equipment

  • Siemens 828D Control.
  • Optimised Digital Servo Drives.
  • Rigid Tapping.
  • Flood Coolant.
  • Worklight.
  • 24 Station Arm Type ATC.
  • Easy Clean Swarf Tray.
  • Steel Concertina Guards on all axes.
  • Powder Coated Guarding.
  • Pull Studs.
  • USB Port.
  • Compact Flash Card Slot.

Optional Equipment

  • 4th Axis Rotary Table.
  • Swarf Conveyor and Bin.
  • Renishaw / Heidenhain Toolsetting and Probing.
  • 12,000 rpm Spindle.
  • Through Spindle Coolant.
  • Remote Electronic Handwheel.
  • Side Vision Panels.
  • Offline Programming.
  • ShopMill Advanced Software.
  • Contour Handwheel (wind the handwheel to run through the program).
  • Factory Networking.
  • Advanced Swarf Management System.
  • DXF Reader.
  • Coolant Washdown Gun.

Call 01823 674200 for more details.

Watch The Videos Below

A Look at the 1600 LR

Alken Engineering chose the XYZ LR range

XYZ VMC Range

Linear Roller Bearing Slides

XYZ Machine Tools makes use of linear roller bearing slide technology for high-speed, high-precision applications that also call for enhanced slideway stiffness and rigidity whilst cutting. These slideways provide a larger bearing contact area and can be found on the XYZ 1060 HS and XYZ UMC-5X high speed five-axis machines, where they provide optimum cutting performance for the applications that these machines face.

The largest machine in the LR range

As the largest machine in the LR range the XYZ 1600 LR provides large capacity at an affordable price.

The XYZ 1600 LR has an impressive specification, including 1,600mm of travel in the X-axis 660 in Y and 635 in Z. It has a 15 kW, 10,000 rpm, BT 40 spindle as well as the standard 24 station arm-type tool changer.

Give yourself a competitive advantage, charge higher rates for those bigger jobs or get more smaller jobs on the table.

There may well be a shortage of bigger capacity machines in your area.

Specification

XYZ 500 LRXYZ 750 LRXYZ 1000 LRXYZ 1600 LR
X Axis Table Travel500mm750mm1,000mm1,600mm
Y Axis Table Travel400mm440mm500mm650mm
Z Vertical Travel440mm500mm500mm630mm
Table Size580 x 400mm830 x 410mm1,060 x 500mm1,660 x 660mm
Spindle Centre to Column415mm500mm532mm750mm
Spindle to Table100 - 550mm100 - 600mm110 - 610mm105 - 740mm
Column Front to Table Centre215 - 615mm305 - 745mm282mm - 782mm370 - 1,030mm
Rapid Feedrate20M/min20M/min20M/min20M/min
Cutting Feedrates1 - 20,000 MM/min1 - 20,000 MM/min1 - 20,000 MM/min1 - 20,000 MM/min
Max Table Load250kg500kg800kg1,000kg
T Slot Size16mm16mm16mm18mm
T Slot Number & Pitch3 off @125mm Pitch3 off @100mm Pitch4 off @ 125mm Pitch5 off @ 100mm Pitch
Spindle Speeds5 - 8,000 rpm (12,000 Optional)5 - 8,000 rpm (12,000 Optional)5 - 8,000 rpm (12,000 Optional)5 - 10,000 rpm (12,000 Optional)
Spindle Motor15kW (20hp)15kW (20hp)15kW (20hp)15kW (20hp)
Spindle TaperBT40 (SK & Cat Optional)BT40 (SK & Cat Optional)BT40 (SK & Cat Optional)BT40 (SK & Cat Optional)
Toolchanger12 Station Carousel20 Station Carousel (24 Arm type Optional)20 Station Carousel (24 Arm type Optional)24 Station Arm Type ATC
Toolchange Time8 secs8 secs (Carousel) / 2.5 secs (Arm)8 secs (Carousel) / 2.5 secs (Arm)2.5 secs
Max Tool Diameter100mm100mm (Carousel) / 78mm (Arm) 100mm (Carousel) / 78mm (Arm)78mm
Max Tool Weight7Kg7Kg7Kg7Kg
Max Tool Length250mm250mm250mm250mm
Coolant Tank Capacity105L125L160L300L
Ballscrew (Grade C3)28mm Dia P832mm Dia P832mm Dia P840mm Dia P8
AC Digital Servo Motors Max TorqueX = 8 Nm / Y = 8 Nm / Z = 12 Nm 3,000 rpmX = 8 Nm / Y = 8 Nm / Z = 12 Nm 3,000 rpmX = 8 Nm / Y = 8 Nm / Z = 12 Nm 3,000 rpmX = 12 Nm / Y = 12 Nm / Z = 16 Nm 3,000 rpm
Machine Weight2,400kg3,500kg4,600kg6,700kg
Footprint1,890 x 1,982 x 2,700mm2,362 x 2,170 x 2,655mm2,865 x 2,390 x 2,680mm4,305 x 2,735 x 2,900mm
Pull Stud TypeMAS403 Type1MAS403 Type1MAS403 Type1MAS403 Type1
Servo MotorSiemens Digital ServoSiemens Digital ServoSiemens Digital ServoSiemens Digital Servo
Coolant Pump0.2kW0.2kW0.63kW0.63kW
Slideway TypeLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball Bearing
Working Height (without riser blocks)2,200mm2,645mm2,700mm3,100mm
Power Requirements37A39A39A45A
Air Requirements6 bar (220 L/min)6 bar (220 L/min)6 bar (220 L/min)6 bar (220 L/min)
XYZ 1600 LR
X Axis Table Travel1,600mm
Y Axis Table Travel650mm
Z Vertical Travel630mm
Table Size1,660 x 660mm
Spindle Centre to Column750mm
Spindle to Table105 - 740mm
Column Front to Table Centre370 - 1,030mm
Rapid Feedrate20M/min
Cutting Feedrates1 - 20,000 MM/min
Max Table Load1,000kg
T Slot Size18mm
T Slot Number & Pitch5 off @ 100mm Pitch
Spindle Speeds5 - 10,000 rpm (12,000 Optional)
Spindle Motor15kW (20hp)
Spindle TaperBT40 (SK & Cat Optional)
Toolchanger24 Station Arm Type ATC
Toolchange Time2.5 secs
Max Tool Diameter78mm
Max Tool Weight7Kg
Max Tool Length250mm
Coolant Tank Capacity300L
Ballscrew (Grade C3)40mm Dia P8
AC Digital Servo Motors Max TorqueX = 12 Nm / Y = 12 Nm / Z = 16 Nm 3,000 rpm
Machine Weight6,700kg
Footprint4,305 x 2,735 x 2,900mm
Pull Stud TypeMAS403 Type1
Servo MotorSiemens Digital Servo
Coolant Pump0.63kW
Slideway TypeLinear Rail Ball Bearing
Working Height (without riser blocks)3,100mm
Power Requirements45A
Air Requirements6 bar (220 L/min)