830 x 410 mm TABLE
750 x 440 x 500 mm TRAVEL

Standard Equipment

  • ProtoTRAK® touchscreen RMX control.
  • Optimised digital servo drives.
  • Remote electronic hand wheel.
  • Flood coolant.
  • Worklight.
  • 20 Station carousel tool changer.
  • Easy clean swarf tray.
  • Steel concertina guards on all axis.
  • Powder coated guarding.
  • Pull studs.
  • USB ports.
  • Ethernet.

Optional Equipment

  • 4th axis rotary table.
  • Swarf Conveyor and bin.
  • 12,000 rpm spindle.
  • Through spindle coolant.
  • Movable electronic hand wheels for setting, manual operation and TRAKing®.
  • Side vision panels.
  • Offline RMX programming.
  • DXF convertor.
  • Parasolid convertor.
  • Coolant washdown gun.
  • Remote stop go switch.
  • Advanced features.
  • MT connect.

Call 01823 674200 for more details.

See the Videos Below

Take a look at the XYZ TMC range with Nigel Atherton

Linear Rail Ball Bearing Slides

The use of linear rails on machining centres has been common for many years, as they allow users to take advantage of improvements in digital motion control and modern cutting tool performance, therefore maximising their competitiveness. 

XYZ 750 TMC is a mid-sized, all-purpose machine.

The XYZ 750 TMC is a mid-sized machining centre with the versatility to satisfy both manufacturers from one off/small batch parts to full production runs. Using proven linear rail technology offering travels of  750 x 440 x 500 mm combined with an 8,000 rpm spindle, 20 station toolchanger and the latest ProtoTRAK® RMX control. The XYZ 750 TMC gives users the opportunity to manufacture one off’s traditionally produced on manual machines using the handwheels located at the front of the machine or step straight into full production by creating programs for the ProtoTRAK® CNC on board or offline. A truly flexible solution for today’s manufacturing needs.


Spindle Motor11kW (15HP)11kW (15HP)11kW (15HP)11kW (15HP)
Spindle Speeds5 - 8000 rpm (12,000 Optional)5 - 8000 RPM (12,000 Optional)5 - 8000 RPM (12,000 Optional)5 - 8000 RPM (12,000 Optional)
Spindle TaperBT40BT40BT40BT40
Pull Stud TypeMAS403 Type1MAS403 Type1MAS403 Type1MAS403 Type1
Spindle Centre to Column415mm500mm532mm750mm
Spindle to Table100mm - 550mm100mm - 600mm100mm - 600mm105 - 740 mm
Column Front to Table Centre215mm - 615mm305mm - 745mm382mm - 782mm370 - 1,030 mm
Table Size580mm X 400mm830mm X 410mm1060mm X 500mm1,600 x 660 mm
Max Table Load250Kg500Kg800Kg1,000Kg
T Slot Number & Pitch3 @125mm3 @100mm4 @ 125mm5 @ 100mm Pitch
T Slot Size16mm16mm16mm18mm
X Axis Table Travel510mm750mm1000mm1,600mm
Y Axis Table Travel400mm440mm500mm660mm
Z Vertical Travel450mm500mm500mm635mm
Ballscrew (Grade C3)28mm Dia P832mm Dia P832mm Dia P840mm Dia P12
AC Servo motor sizeX and Y 5Nm, Z 10NmX and Y 5Nm, Z 10NmX and Y 5Nm, Z 10NmX and Y 10Nm, Z 15Nm
Rapid Feed XYZ axis20M/min20M/min20M/min20M/min
Cutting Feed Rates1-20000mm/min1-20000mm/min1-20000mm/min1-20000mm/min
Toolchanger12 Station Carousel20 Station Carousel20 Station Carousel20 Station Carousel
Tool Change Time8 secs8 secs8 secs8 secs
Max Tool Diameter100mm80mm80mm80mm
Max Tool Weight6Kg7Kg7Kg8Kg
Coolant Tank Capacity105L125L160L160L
Slideway TypeLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball Bearing
Footprint (without travels)1,660mm X 1,860mm X 2,300mm2,100mm X 2,150mm X 2,450mm2,530mm X 2,200mm X 2,500mm4,000 x 2,650 x 3,000 mm
Working Height (without riser blocks)2200mm2645mm2700mm3,200mm
Machine Weight2,400Kg3,500Kg4,600Kg6,500Kg
Power Requirements43A44A46A53A
Air Requirements5.5 bar6 bar (220 L/min)6 bar (220 L/min)6 bar (220 L/min)
 XYZ 750 TMC
Spindle Motor11kW (15HP)
Spindle Speeds5 - 8000 RPM (12,000 Optional)
Spindle TaperBT40
Pull Stud TypeMAS403 Type1
Spindle Centre to Column500mm
Spindle to Table100mm - 600mm
Column Front to Table Centre305mm - 745mm
Table Size830mm X 410mm
Max Table Load500Kg
T Slot Number & Pitch3 @100mm
T Slot Size16mm
X Axis Table Travel750mm
Y Axis Table Travel440mm
Z Vertical Travel500mm
Ballscrew (Grade C3)32mm Dia P8
AC Servo motor sizeX and Y 5Nm, Z 10Nm
Rapid Feed XYZ axis20M/min
Cutting Feed Rates1-20000mm/min
Toolchanger20 Station Carousel
Tool Change Time8 secs
Max Tool Diameter80mm
Max Tool Weight7Kg
Coolant Tank Capacity125L
Slideway TypeLinear Rail Ball Bearing
Footprint (without travels)2,100mm X 2,150mm X 2,450mm
Working Height (without riser blocks)2645mm
Machine Weight3,500Kg
Power Requirements44A
Air Requirements6 bar (220 L/min)