fbpx

XYZ 500 LR

XYZ 500 LR

SPINDLE 18 HP / 13 kW
580 x 400 mm TABLE
510 x 400 x 450 mm TRAVEL
8000 RPM SPINDLE
SOLID CASTING 2400 KG

Conforming to ISO 10791
Positional accuracy +/- 5 microns
Repeatability +/- 2 microns
Circularity over 300mm 10 microns
Geometric accuracy over 300mm 10 microns

Standard Equipment

  • Siemens 828D Control
  • Linear Bearing Slideways
  • UK PLC written by Siemens UK
  • Auto Lubrication
  • Flood Coolant
  • High Pressure Coolant wash Down
  • Programmable Air Blast
  • Spindle Air Blast
  • Steel Concertina Guarding
  • Fully Guarded with Large Single Door Access
  • Full CE Approval & Certification

Optional Equipment

  • 4th Axis Rotary Table.
  • Swarf Conveyor and Bin.
  • Renishaw/Heidenhain Toolsetting and Probing.
  • 12,000 RPM Spindle.
  • Through Spindle Coolant.
  • Remote Electronic Handwheel.
  • Side Vision Panels.
  • Offline Programming.
  • ShopMill Advanced Software.
  • Contour Handwheel (wind the handwheel to run through the program).
  • Factory Networking.
  • Advanced Swarf Management System.

Call 01823 674200 for more details.

Alken Engineering chose the XYZ LR range

XYZ VMC Range

XYZ 500 LR makes machining even more affordable

The XYZ 500 LR is the smallest machine in XYZ’s new linear rail technology range. As part of this new range of machines, the XYZ 500 LR offers price competitive performance with axis travels of 510 x 400 x 450 mm, 8000 rpm spindle and 20m/min cutting feedrates. The move to linear rail technology comes after recent significant design advances in these rails, which now makes them compatible with XYZ’s quality/performance criteria. With their addition to the XYZ range the LR machines offer a lower cost introduction to VMC ownership. XYZ Machine Tools is happy to demonstrate the capability of these machines at any of its UK showrooms.

Linear Rail Ball Bearing Slides

The use of linear rails on machining centres has been common for many years, as they allow users to take advantage of improvements in digital motion control and modern cutting tool performance, therefore maximising their competitiveness. Now, with the latest design advances in linear rail technology, XYZ Machine Tools feel that they meet its own stringent performance standards, while still providing a cost advantage and the arrival of the three machine XYZ LR range is the result.

Specification

 XYZ 500 LRXYZ 750 LRXYZ 1000 LR
Spindle MotorSiemens 18HPSiemens 18HPSiemens 18HP
Spindle Speeds5 - 8000 rpm (12,000 Optional)5 - 8000 RPM (12,000 Optional)5 - 8000 RPM (12,000 Optional)
Spindle TaperBT40 (SK & Cat Optional)BT40 (SK & Cat Optional)BT40 (SK & Cat Optional)
Pull Stud TypeMAS403 Type1MAS403 Type1MAS403 Type1
Spindle Centre to Column415mm500mm532mm
Spindle to Table100mm - 550mm100mm - 600mm110mm - 610mm
Column Front to Table Centre215mm - 615mm305mm - 745mm382mm - 782mm
Table Size580mm X 400mm830mm X 410mm1060mm X 500mm
Max Table Load250Kg500Kg800Kg
T Slots3 off @125mm Pitch3 off @100mm Pitch4 off @ 125mm Pitch
T Slot Size16mm16mm16mm
X Axis Table Travel510mm750mm1000mm
Y Axis Table Travel400mm440mm500mm
Z Vertical Travel450mm500mm500mm
BallscrewGrade C3 - 28mm Dia P8Grade C3 - 32mm Dia P8Grade C3 - 32mm Dia P8
AC Digital Servo Motors Max Torque8Nm (X & Y) 12Nm (Z) 3000rpm8Nm (X & Y) 12Nm (Z) 3000rpm8Nm (X & Y) 12Nm (Z) 3000rpm
Servo MotorUK Spec' Siemens Digital ServoUK Spec' Siemens Digital ServoUK Spec' Siemens Digital Servo
Rapid Feedrate20M/min20M/min20M/min
Cutting Feedrates1-20000mm/min1-20000mm/min1-20000mm/min
Toolchanger12 Station Carousel20 Station Carousel (24 Arm type Optional)20 Station Carousel (24 Arm type Optional)
Toolchange Time8 secs8 secs8 secs
Max Tool Diameter100mm (see note below)100mm (see note below)80mm (see note below)
Max Tool Weight6Kg6Kg7Kg
Max Tool Length250mm250mm250mm
Coolant Pump0.38Kw2 off 1.8A2 off 1.8A
Coolant Tank Capacity105L125L160L
Slideway TypeLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball Bearing
Footprint (without travels)1660mm X 1860mm X 2300mm2100mm X 2150mm X 2450mm2530mm X 2200mm X 2500mm
Working Height (without riser blocks)2200mm2645mm2700mm
Machine Weight2,400Kg3,500Kg4,600Kg
Power Requirements37A39A39A
Air Requirements5.5 bar6 bar (220 L/min)6 bar (220 L/min)
 XYZ 500 LR
Spindle MotorSiemens 18HP
Spindle Speeds5 - 8000 rpm (12,000 Optional)
Spindle TaperBT40 (SK & Cat Optional)
Pull Stud TypeMAS403 Type1
Spindle Centre to Column415mm
Spindle to Table100mm - 550mm
Column Front to Table Centre215mm - 615mm
Table Size580mm X 400mm
Max Table Load250Kg
T Slots3 off @125mm Pitch
T Slot Size16mm
X Axis Table Travel510mm
Y Axis Table Travel400mm
Z Vertical Travel450mm
BallscrewGrade C3 - 28mm Dia P8
AC Digital Servo Motors Max Torque8Nm (X & Y) 12Nm (Z) 3000rpm
Servo MotorUK Spec' Siemens Digital Servo
Rapid Feedrate20M/min
Cutting Feedrates1-20000mm/min
Toolchanger12 Station Carousel
Toolchange Time8 secs
Max Tool Diameter100mm (see note below)
Max Tool Weight6Kg
Max Tool Length250mm
Coolant Pump0.38Kw
Coolant Tank Capacity105L
Slideway TypeLinear Rail Ball Bearing
Footprint (without travels)1660mm X 1860mm X 2300mm
Working Height (without riser blocks)2200mm
Machine Weight2,400Kg
Power Requirements37A
Air Requirements5.5 bar