fbpx

XYZ 1600 LR

XYZ 1600 LR

SPINDLE 20 HP / 15 kW
1,600 x 660 mm TABLE
1,600 x 660 x 635 mm TRAVEL
8,000 RPM SPINDLE
SOLID CASTING 6,500 KG

Conforming to ISO 10791
Positional accuracy +/- 5 microns
Repeatability +/- 2 microns
Circularity over 300mm 10 microns
Geometric accuracy over 300mm 10 microns

Standard Equipment

  • Siemens 828D Control.
  • Optimised Digital Servos.
  • Rigid Tapping. Flood Coolant.
  • Worklight.
  • 24 Station Arm Type ATC.
  • Easy Clean Swarf Tray.
  • Steel Concertina Guards on all axes.
  • Powder Coated Guarding.
  • Pull Studs.
  • USB Port.
  • Compact Flash Card Slot.

Optional Equipment

  • 4th Axis Rotary Table.
  • Swarf Conveyor and Bin.
  • Renishaw/Heidenhain Toolsetting and Probing.
  • 12,000 rpm Spindle.
  • Through Spindle Coolant.
  • Remote Electronic Handwheel.
  • Side Vision Panels.
  • Offline Programming.
  • ShopMill Advanced Software.
  • Contour Handwheel (wind the handwheel to run through the program).
  • Factory Networking.
  • Advanced Swarf Management System.
  • DXF Reader.

Call 01823 674200 for more details.

See the Videos Below

Alken Engineering chose the XYZ LR range

XYZ VMC Range

Linear Rail Ball Bearing Slides

The use of linear rails on machining centres has been common for many years, as they allow users to take advantage of improvements in digital motion control and modern cutting tool performance, therefore maximising their competitiveness. Now, with the latest design advances in linear rail technology, XYZ Machine Tools feel that they meet its own stringent performance standards, while still providing a cost advantage and the arrival of the three machine XYZ LR range is the result.

The largest machine in the LR range 

As the largest machine in the LR range the XYZ 1600 LR provides large capacity at an affordable price.

The XYZ 1600 LR has an impressive specification, including 1,600 mm of travel in the X-axis 660 in Y and 635 in Z. It has a 15 kW, 8,000 rpm, BT 40 spindle as well as the standard 24 station arm-type tool changer.

The recent development in linear rail technology now means that XYZ can deliver a machine of this size to a very competitive price/performance ratio. Demonstrations of XYZ’s linear rail machines are available at any of the XYZ showrooms.

Give yourself a competitive advantage, charge higher rates for those bigger jobs or get more smaller jobs on the table.
There may well be a shortage of bigger capacity machines in your area.

Specification

 XYZ 500 LRXYZ 750 LRXYZ 1000 LRXYZ 1600 LR
Spindle MotorSiemens 18HPSiemens 18HPSiemens 18HPSiemens 20HP
Spindle Speeds5 - 8000 rpm (12,000 Optional)5 - 8000 RPM (12,000 Optional)5 - 8000 RPM (12,000 Optional)5 - 8000 RPM (12,000 Optional)
Spindle TaperBT40 (SK & Cat Optional)BT40 (SK & Cat Optional)BT40 (SK & Cat Optional)BT40 (SK & Cat Optional)
Pull Stud TypeMAS403 Type1MAS403 Type1MAS403 Type1MAS403 Type1
Spindle Centre to Column415mm500mm532mm750mm
Spindle to Table100mm - 550mm100mm - 600mm110mm - 610mm105 - 740 mm
Column Front to Table Centre215mm - 615mm305mm - 745mm382mm - 782mm370 - 1,030 mm
Table Size580mm X 400mm830mm X 410mm1060mm X 500mm1,600 x 660 mm
Max Table Load250Kg500Kg800Kg1,000Kg
T Slots3 off @125mm Pitch3 off @100mm Pitch4 off @ 125mm Pitch5 off @ 100mm Pitch
T Slot Size16mm16mm16mm18mm
X Axis Table Travel510mm750mm1000mm1,600mm
Y Axis Table Travel400mm440mm500mm660mm
Z Vertical Travel450mm500mm500mm635mm
BallscrewGrade C3 - 28mm Dia P8Grade C3 - 32mm Dia P8Grade C3 - 32mm Dia P8Grade C3 - 40mm Dia P8
AC Digital Servo Motors Max Torque8Nm (X & Y) 12Nm (Z) 3000rpm8Nm (X & Y) 12Nm (Z) 3000rpm8Nm (X & Y) 12Nm (Z) 3000rpm12Nm (X & Y) 16Nm (Z) 3000rpm
Servo MotorUK Spec' Siemens Digital ServoUK Spec' Siemens Digital ServoUK Spec' Siemens Digital ServoUK Spec' Siemens Digital Servo
Rapid Feedrate20M/min20M/min20M/min20M/min
Cutting Feedrates1-20000mm/min1-20000mm/min1-20000mm/min1-20000mm/min
Toolchanger12 Station Carousel20 Station Carousel (24 Arm type Optional)20 Station Carousel (24 Arm type Optional)24 Station Arm Type ATC
Toolchange Time8 secs2.5 secs2.5 secs2.5 secs
Max Tool Diameter100mm (see note below)100mm (see note below)80mm (see note below)80mm (see note below)
Max Tool Weight6Kg6Kg7Kg8Kg
Max Tool Length250mm250mm250mm250mm
Coolant Pump0.38Kw2 off 1.8A2 off 1.8A2 off 1.8A
Coolant Tank Capacity105L125L160L160L
Slideway TypeLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball Bearing
Footprint (without travels)1660mm X 1860mm X 2300mm2100mm X 2150mm X 2450mm2530mm X 2200mm X 2500mm4,000 x 2,650 x 3,000 mm
Working Height (without riser blocks)2200mm2645mm2700mm3,200mm
Machine Weight2,400Kg3,500Kg4,600Kg6,500Kg
Power Requirements37A39A39A39A
Air Requirements5.5 bar6 bar (220 L/min)6 bar (220 L/min)6 bar (220 L/min)
 XYZ 1600 LR
Spindle MotorSiemens 20HP
Spindle Speeds5 - 8000 RPM (12,000 Optional)
Spindle TaperBT40 (SK & Cat Optional)
Pull Stud TypeMAS403 Type1
Spindle Centre to Column750mm
Spindle to Table105 - 740 mm
Column Front to Table Centre370 - 1,030 mm
Table Size1,600 x 660 mm
Max Table Load1,000Kg
T Slots5 off @ 100mm Pitch
T Slot Size18mm
X Axis Table Travel1,600mm
Y Axis Table Travel660mm
Z Vertical Travel635mm
BallscrewGrade C3 - 40mm Dia P8
AC Digital Servo Motors Max Torque12Nm (X & Y) 16Nm (Z) 3000rpm
Servo MotorUK Spec' Siemens Digital Servo
Rapid Feedrate20M/min
Cutting Feedrates1-20000mm/min
Toolchanger24 Station Arm Type ATC
Toolchange Time2.5 secs
Max Tool Diameter80mm (see note below)
Max Tool Weight8Kg
Max Tool Length250mm
Coolant Pump2 off 1.8A
Coolant Tank Capacity160L
Slideway TypeLinear Rail Ball Bearing
Footprint (without travels)4,000 x 2,650 x 3,000 mm
Working Height (without riser blocks)3,200mm
Machine Weight6,500Kg
Power Requirements39A
Air Requirements6 bar (220 L/min)