fbpx

XYZ 1000 LR

XYZ 1000 LR

SPINDLE 18 HP / 13 kW
1060 x 500 mm TABLE
1000 x 500 x 500 mm TRAVEL
8000 RPM SPINDLE
SOLID CASTING 4600 KG

Conforming to ISO 10791
Positional accuracy+/- 5 microns
Repeatability+/- 2 microns
Circularity over 300mm10 microns
Geometric accuracy over 300mm10 microns

Standard Equipment

  • Siemens 828D Control.
  • Optimised Digital Servos.
  • Rigid Tapping.
  • Flood Coolant.
  • Worklight.
  • 20 Station Carousel.
  • Easy Clean Swarf Tray.
  • Steel Concertina Guards on all axes.
  • Powder Coated Guarding.
  • Pull Studs.
  • USB Port.
  • Compact Flash Card Slot.

Optional Equipment

  • 4th Axis Rotary Table.
  • Swarf Conveyor and Bin.
  • Renishaw/Heidenhain Toolsetting and Probing.
  • 12,000RPM Spindle.
  • Through Spindle Coolant.
  • Remote Electronic Handwheel.
  • Side Vision Panels.
  • Offline Programming.
  • 24 Station Arm Type ATC.
  • ShopMill Advanced Software.
  • Contour Handwheel (wind the handwheel to run through the program).
  • Factory Networking.
  • Advanced Swarf Management System.

Call 01823 674200 for more details.

The XYZ 1000 LR provides large capacity at affordable prices

As the largest machine in the new XYZ Linear rail series of vertical machining centres the XYZ 1000 LR has an impressive specification, including 1000 mm of travel in the X-axis and 500 mm in both the Y and Z axes. It shares the same 13 kW, 8000 rpm, BT 40 spindle with the other machines in the range as well as the standard 20 position tool carousel. It also has the option of a 24 station arm-type tool changer. The recent development in linear rail technology now means that XYZ can deliver a machine of this size to a very competitive price/performance ratio. Demonstrations of XYZ’s linear rail machines are available at any of the XYZ showrooms.

Linear Rail Ball Bearing Slides

The use of linear rails on machining centres has been common for many years, as they allow users to take advantage of improvements in digital motion control and modern cutting tool performance, therefore maximising their competitiveness. Now, with the latest design advances in linear rail technology, XYZ Machine Tools feel that they meet its own stringent performance standards, while still providing a cost advantage and the arrival of the three machine XYZ LR range is the result.

Specification

 XYZ 500 LRXYZ 750 LRXYZ 1000 LR
Spindle MotorSiemens 18HPSiemens 18HPSiemens 18HP
Spindle Speeds5 - 8000 rpm (12,000 Optional)5 - 8000 RPM (12,000 Optional)5 - 8000 RPM (12,000 Optional)
Spindle TaperBT40 (SK & Cat Optional)BT40 (SK & Cat Optional)BT40 (SK & Cat Optional)
Pull Stud TypeMAS403 Type1MAS403 Type1MAS403 Type1
Spindle Centre to Column415mm500mm532mm
Spindle to Table100mm - 550mm100mm - 600mm110mm - 610mm
Column Front to Table Centre215mm - 615mm305mm - 745mm382mm - 782mm
Table Size580mm X 400mm830mm X 410mm1060mm X 500mm
Max Table Load250Kg500Kg800Kg
T Slots3 off @125mm Pitch3 off @100mm Pitch4 off @ 125mm Pitch
T Slot Size16mm16mm16mm
X Axis Table Travel510mm750mm1000mm
Y Axis Table Travel400mm440mm500mm
Z Vertical Travel450mm500mm500mm
BallscrewGrade C3 - 28mm Dia P8Grade C3 - 32mm Dia P8Grade C3 - 32mm Dia P8
AC Digital Servo Motors Max Torque8Nm (X & Y) 12Nm (Z) 3000rpm8Nm (X & Y) 12Nm (Z) 3000rpm8Nm (X & Y) 12Nm (Z) 3000rpm
Servo MotorUK Spec' Siemens Digital ServoUK Spec' Siemens Digital ServoUK Spec' Siemens Digital Servo
Rapid Feedrate20M/min20M/min20M/min
Cutting Feedrates1-20000mm/min1-20000mm/min1-20000mm/min
Toolchanger12 Station Carousel20 Station Carousel (24 Arm type Optional)20 Station Carousel (24 Arm type Optional)
Toolchange Time8 secs8 secs8 secs
Max Tool Diameter100mm (see note below)100mm (see note below)80mm (see note below)
Max Tool Weight6Kg6Kg7Kg
Max Tool Length250mm250mm250mm
Coolant Pump0.38Kw2 off 1.8A2 off 1.8A
Coolant Tank Capacity105L125L160L
Slideway TypeLinear Rail Ball BearingLinear Rail Ball BearingLinear Rail Ball Bearing
Footprint (without travels)1660mm X 1860mm X 2300mm2100mm X 2150mm X 2450mm2530mm X 2200mm X 2500mm
Working Height (without riser blocks)2200mm2645mm2700mm
Machine Weight2,400Kg3,500Kg4,600Kg
Power Requirements37A39A39A
Air Requirements5.5 bar6 bar (220 L/min)6 bar (220 L/min)
 XYZ 1000 LR
Spindle MotorSiemens 18HP
Spindle Speeds5 - 8000 RPM (12,000 Optional)
Spindle TaperBT40 (SK & Cat Optional)
Pull Stud TypeMAS403 Type1
Spindle Centre to Column532mm
Spindle to Table110mm - 610mm
Column Front to Table Centre382mm - 782mm
Table Size1060mm X 500mm
Max Table Load800Kg
T Slots4 off @ 125mm Pitch
T Slot Size16mm
X Axis Table Travel1000mm
Y Axis Table Travel500mm
Z Vertical Travel500mm
BallscrewGrade C3 - 32mm Dia P8
AC Digital Servo Motors Max Torque8Nm (X & Y) 12Nm (Z) 3000rpm
Servo MotorUK Spec' Siemens Digital Servo
Rapid Feedrate20M/min
Cutting Feedrates1-20000mm/min
Toolchanger20 Station Carousel (24 Arm type Optional)
Toolchange Time8 secs
Max Tool Diameter80mm (see note below)
Max Tool Weight7Kg
Max Tool Length250mm
Coolant Pump2 off 1.8A
Coolant Tank Capacity160L
Slideway TypeLinear Rail Ball Bearing
Footprint (without travels)2530mm X 2200mm X 2500mm
Working Height (without riser blocks)2700mm
Machine Weight4,600Kg
Power Requirements39A
Air Requirements6 bar (220 L/min)
Share This