XYZ PROTURN RLX 355
XYZ PROTURN RLX 355
SWING OVER BED 360mm
SPINDLE BORE 52mm
DISTANCE BETWEEN CENTRES 1000mm
MAX 4000 RPM
- Constant Surface Speed.
- Verify Solid Model Graphics.
- 2 Speed Headstock.
- Rapid Traverse with Joy Stick.
- 3 Jaw Chuck 200mm.
- Quick Change Toolpost and 6 Holders.
- Centres and Bushes.
- Air Assisted Floating Tailstock.
- Interlocked Chuck Guard and Main Guard.
- Auto Lubrication.
- 4 or 8 Station Auto Indexing Toolposts.
- Faceplates, Steadies, Chucks and Collet Chucks.
- Offline Software.
- Adjustable Back Stop.
- DXF Converter.
- Drilling Attachment.
- Swarf Conveyor.
New Hardware, Faster Feeds,
24 NEW features.
Now with 15.6” touch screen.
Drawing to finished component much faster than before.
Take a closer look at the XYZ RLX 355
Introducing: The ProtoTRAK RX
TRAKing on XYZ ProTURN Lathes
|XYZ RLX 1630||XYZ RLX 355||XYZ RLX 425 x 1.25m / 2m||XYZ RLX 555 x 1m / 1.75m||XYZ RLX 555 x 3m||XYZ RLX 780 x 3m|
|Spindle||7.5HP Variable Spindle Speed with Yaskawa Inverter Drive||7.5HP Variable Spindle Speed with Yaskawa Inverter Drive||10HP Variable Spindle Speed with Yaskawa Inverter Drive||15HP Variable Spindle Speed with Yaskawa Inverter Drive||15HP Variable Spindle Speed with Yaskawa Inverter Drive||40HP Variable Spindle Speed with Yaskawa Inverter Drive|
|Spindle Speeds||150 - 2,500rpm||50 - 4,000rpm||25 - 2,500rpm||30 - 1,800rpm||30 - 1,800rpm||20 - 1300rpm|
|Spindle Nose||D1-6 Camlock||D1-6 Camlock||D1-8 Camlock||D1-11 Camlock||D1-11 Camlock||A2-11|
|Speed Ranges||Single Range 150 - 2,500rpm||2 Ranges High 100 - 4,000rpm / Low 50 - 1,410rpm||3 Ranges High 140 - 2,500rpm / Med 50 - 850rpm / Low 25 - 300rpm||2 Ranges High 140 - 1,800rpm / Low 30 - 375rpm||2 Ranges High 140 - 1,800rpm & Low 30 - 375rpm||2 Ranges High 40 - 1300rpm & Low 20 - 415rpm|
|Spindle Taper||MT4 in bush||MT4 in bush||MT7 in bush||MT7 in bush||MT7 in bush||MT7 in bush|
|Swing Over Bed||400mm||360mm||480mm||560mm||560mm||780mm|
|Swing in Gap||N/A||N/A||700mm||780mm||900mm||1090mm|
|Gap in front of Faceplate||N/A||N/A||170mm||227mm||210mm||157mm|
|Swing over Cross Slide||218mm||225mm||257mm||350mm||350mm||535mm|
|Cross Slide Travel||216mm||185mm||230mm||280mm||375mm||430mm|
|Distance between Centres||760mm||1000mm||1250mm / 2000mm||1000mm / 1750mm||3000mm||3000mm|
|Maximum Cutting Length||760mm||900mm||1080mm / 1900mm||900mm / 1650mm||2900mm||2900mm|
|Ballscrews||X & Z||X & Z||X & Z||X & Z||X & Z||X & Z|
|Servo Motors||X & Z||X & Z||X & Z||X & Z||X & Z||X & Z|
|Floorplan (L x D x H)||2090 x 1200 x 1800 mm||2300 x 1370 x 1810 mm||2600 x 1480 x 1830 mm / 3460 x 1480 x 1830 mm||2600 x 1600 x 1910mm / 3450 x 1600 x 1910 mm||5400 x 2010 x 1840 mm||5400 x 2300 x 2100mm|
|Machine Weight||1550KG||1930KG||2700Kg / 3700KG||3200KG / 4100KG||6600KG||8,600KG|
|Air Requirements||No Air Required||6 bar (220 L/min)||6 bar (220 L/min)||6 bar (220 L/min)||6 bar (220 L/min)||6 bar (220 L/min)|
|XYZ RLX 355|
|Spindle||7.5HP Variable Spindle Speed with Yaskawa Inverter Drive|
|Spindle Speeds||50 - 4,000rpm|
|Spindle Nose||D1-6 Camlock|
|Speed Ranges||2 Ranges High 100 - 4,000rpm / Low 50 - 1,410rpm|
|Spindle Taper||MT4 in bush|
|Swing Over Bed||360mm|
|Swing in Gap||N/A|
|Gap in front of Faceplate||N/A|
|Swing over Cross Slide||225mm|
|Cross Slide Travel||185mm|
|Distance between Centres||1000mm|
|Maximum Cutting Length||900mm|
|Ballscrews||X & Z|
|Servo Motors||X & Z|
|Floorplan (L x D x H)||2300 x 1370 x 1810 mm|
|Air Requirements||6 bar (220 L/min)|
The latest generation of ProtoTRAK RLX control provides maximum operator productivity particularly on one-off components or small batches. Even an operator with no previous CNC experience will be producing simple or complex parts within hours.
Heavy tailstock with two clamp points prevents movement when machining components between centres. Repostioning is effortless and is achieved by providing an air cushion that lifts the tailstock from the bed (not on the XYZ ProTURN RLX 1630).
Built and guarded to comply with the latest CE regulations to ensure complete operator safety. When closed and in full CNC operation the easy lift, totally enclosed guard, ensures water tight containment of swarf and coolant.
Saddle & Apron
The apron moves with the saddle and emulates the actions of a manual lathe. This brings reassuring familiarity to the ﬁrst time user of a CNC Lathe, and a joy stick provides for rapid positioning.
The headstock is built using Japanese induction hardened and precision ground gears. Two precision taper roller bearings and a support journal bearing ensure spindle rigidity and concentricity. High pressure oil lubrication is provided to all gears and bearings via a pump and oil cooler ensuring thermal stability, quiet running and long life.
Front opening easy access Swarf Tray makes light work of swarf removal and reduces the amount of space required at the rear of the machine.
Proturn Lathes are standard with TRAKing which allows the operator to wind the handwheel and the machine moves through the program. The faster you wind the faster it machines. Stop or reverse the handwheel and the machine does the same.
Cast Bed Base
Unlike most other Lathes that are cast or fabricated in two or three pieces and then bolted together, the Proturn RLX is a one piece solid ribbed casting that provides weight and rigidity ensuring unrivalled precision. The extra wide ‘Vee and ﬂat’ bed way provides a large bearing surface that makes other Lathes seem ﬂimsy by comparison. The lower cost RLX 1630 does not have a single piece casting.