fbpx

XYZ

ProtoTRAK LPM

The LPM (Lean Production Machine) is the complete machining system that makes idle machine time a thing of the past.

  • 15 HP SPINDLE
  • 900 x 500mm TABLE
  • 785 x 470 x 530mm TRAVEL
  • 8000 RPM SPINDLE
Enquire About This Product
  • This field is for validation purposes and should be left unchanged.

Call 01823 674200 for more information.

Categories: , Tag:

Run and program

Background editing system, allows you to program and set up the next job whilst the machine is still running.

LPM Run and Program

Quick ”Ball lock”

set up Table locating bushes for exact positioning with Jergens® ball locks for precise and secure fixings in seconds.

Quick Ball Lock

 

Tool setting system

Tool presetting trolley for quick and accurate tool setting – slide the new job into position, clamp and run.

Tool Setting

Never forget

Store photos as well as notes all within the program and update whenever you need.

Never Forget Storage System

 

Award Winning

The LPM is an award winning, complete machining system that makes ‘idle machine time’ a thing of the past. Create complex parts in just minutes with the easy to use ProtoTRAK®.

MWP Award

Standard Equipment

  • Optimised Digital Servos.
  • Jergens Ball Lock Table.
  • Rigid Tapping.
  • Flood Coolant.
  • Coolant Washdown.
  • Worklight.
  • 16 Station Tool Changer.
  • Remote Electronic Handwheel.
  • Easy Clean Swarf Tray.
  • Steel Concertina Guards on all Axes.
  • Pull Studs.
  • USB Port.
  • Compact Flash Card Slot.
  • Swarf Auger.
  • Tool Setting Guage.

Optional Equipment

  • 4th Axis Rotary Table.
  • Fixture Trolley.
  • Fixture Plates.
  • Vices and Clamp Kits.
  • DXF File Convertor.
  • Offline Programming.

Control

ProtoTRAK® PMX Control

 

Like all ProtoTRAK® controls the machine can be used manually or under full CNC control, with clearance cycles, profiling, grooving, drilling routines, standard and custom threads.

Specification

Spindle Motor15HP
Spindle Speeds60- 8000RPM
Spindle TaperBT40
Pull Stud TypeMAS1
Spindle Centre to Column489mm
Spindle to Table85 – 610mm
Table Size900 x 500mm
Max Table Load460Kgs
T Slots5off @ 100mm
T Slot Size18mm
X Axis Table Travel785mm
Y Axis Table Travel470mm
Z Vertical Travel530mm
Ballscrew40mm Dia X 8mm Pitch
Rapid Feedrate20 M/min
Cutting Feedrates20 M/min
Toolchanger16 Station Carousel
Toolchange Time8 secs
Max Tool Diameter80mm
Max Tool Weight7kg
Max Tool Length250mm
Coolant Pump2A X 2
Coolant Tank Capacity220L
Slideway TypeLinear Rail
Footprint (inc Swarf Auger)3988 X 2280 X 2616mm
Working Height (without riser blocks)2,616mm
Machine Weight4,000Kgs
Power Requirements37A 3 Phase
Air Requirements6 Bar 220L/min

Siting Requirements 

Product Description

XYZ

ProtoTRAK LPM

The LPM (Lean Production Machine) is the complete machining system that makes idle machine time a thing of the past.

  • 15 HP SPINDLE
  • 900 x 500mm TABLE
  • 785 x 470 x 530mm TRAVEL
  • 8000 RPM SPINDLE
Enquire About This Product
  • This field is for validation purposes and should be left unchanged.

Call 01823 674200 for more information.

Categories: , Tag:

Run and program

Background editing system, allows you to program and set up the next job whilst the machine is still running.

LPM Run and Program

Quick ”Ball lock”

set up Table locating bushes for exact positioning with Jergens® ball locks for precise and secure fixings in seconds.

Quick Ball Lock

 

Tool setting system

Tool presetting trolley for quick and accurate tool setting – slide the new job into position, clamp and run.

Tool Setting

Never forget

Store photos as well as notes all within the program and update whenever you need.

Never Forget Storage System

 

Award Winning

The LPM is an award winning, complete machining system that makes ‘idle machine time’ a thing of the past. Create complex parts in just minutes with the easy to use ProtoTRAK®.

MWP Award

Standard Equipment

  • Optimised Digital Servos.
  • Jergens Ball Lock Table.
  • Rigid Tapping.
  • Flood Coolant.
  • Coolant Washdown.
  • Worklight.
  • 16 Station Tool Changer.
  • Remote Electronic Handwheel.
  • Easy Clean Swarf Tray.
  • Steel Concertina Guards on all Axes.
  • Pull Studs.
  • USB Port.
  • Compact Flash Card Slot.
  • Swarf Auger.
  • Tool Setting Guage.

Optional Equipment

  • 4th Axis Rotary Table.
  • Fixture Trolley.
  • Fixture Plates.
  • Vices and Clamp Kits.
  • DXF File Convertor.
  • Offline Programming.

Control

ProtoTRAK® PMX Control

 

Like all ProtoTRAK® controls the machine can be used manually or under full CNC control, with clearance cycles, profiling, grooving, drilling routines, standard and custom threads.

Specification

Spindle Motor15HP
Spindle Speeds60- 8000RPM
Spindle TaperBT40
Pull Stud TypeMAS1
Spindle Centre to Column489mm
Spindle to Table85 – 610mm
Table Size900 x 500mm
Max Table Load460Kgs
T Slots5off @ 100mm
T Slot Size18mm
X Axis Table Travel785mm
Y Axis Table Travel470mm
Z Vertical Travel530mm
Ballscrew40mm Dia X 8mm Pitch
Rapid Feedrate20 M/min
Cutting Feedrates20 M/min
Toolchanger16 Station Carousel
Toolchange Time8 secs
Max Tool Diameter80mm
Max Tool Weight7kg
Max Tool Length250mm
Coolant Pump2A X 2
Coolant Tank Capacity220L
Slideway TypeLinear Rail
Footprint (inc Swarf Auger)3988 X 2280 X 2616mm
Working Height (without riser blocks)2,616mm
Machine Weight4,000Kgs
Power Requirements37A 3 Phase
Air Requirements6 Bar 220L/min

Siting Requirements